Radio Modules for FCC Part 90
The T Series RF radio transceiver modules are 2W RF OEM radio modules that will satisfy the needs of Part 90 FCC North American applications.
The T Series will also be very attractive to OEMs around the world who want a high quality reliable transceiver module for market areas not needing the higher ETSI type acceptance specifications or the restriction to just 500mW RF output power.
- Compact size
- Synthesised design
- Data recovery circuit
- S Meter output (RSSI)
- 2W maximum RF output
- Serial external frequency control or internal loader
- Meets FCC and DOC requirements
Housed in a compact nickel silver enclosure of size 119 x 57 x 21mm, the T Series radio transceivers have an BNC antenna connector fitted as standard and a 9 way D type interface connector. Output power is 2W at all frequencies.
The units have an internal non-volatile synthesiser loader fitted as standard allowing up to 100 fixed or 16 reprogrammable radio frequencies to be selected. The channels are selected by a simple 'serial load' which allows dynamic changes to be made from the OEM's interface firmware.
Modern design techniques have kept the receive current consumption down to below 50mA from a 12V nominal negative earth supply. The receive/transmit switching time is a respectably below 25mS. Other features include S meter output and receive data recovery for 2400 baud Manchester encoded data.
Standard versions of the T Series are as follows : -
T100 - VHF operation between 150MHz and 180MHz
T200 - VHF operation between 200MHz and 220MHz
T400 - UHF operation between 430MHz and 470MHz
For variants outside of these frequency bands please consult the factory.
For other versions or specific requirements please contact our Sales Team
on +44 (0)118 981 1444
