Radio Modules for FCC Part 90

The T Series RF radio transceiver modules are 2W RF OEM radio modules that will satisfy the needs of Part 90 FCC North American applications.

The T Series will also be very attractive to OEMs around the world who want a high quality reliable transceiver module for market areas not needing the higher ETSI type acceptance specifications or the restriction to just 500mW RF output power.

Compact size
Synthesised design
Data recovery circuit
S Meter output (RSSI)
2W maximum RF output
Serial external frequency control or internal loader
Meets FCC and DOC requirements

Housed in a compact nickel silver enclosure of size 119 x 57 x 21mm, the T Series radio transceivers have an BNC antenna connector fitted as standard and a 9 way D type interface connector. Output power is 2W at all frequencies.

The units have an internal non-volatile synthesiser loader fitted as standard allowing up to 100 fixed or 16 reprogrammable radio frequencies to be selected. The channels are selected by a simple 'serial load' which allows dynamic changes to be made from the OEM's interface firmware.

Modern design techniques have kept the receive current consumption down to below 50mA from a 12V nominal negative earth supply. The receive/transmit switching time is a respectably below 25mS. Other features include S meter output and receive data recovery for 2400 baud Manchester encoded data.

Standard versions of the T Series are as follows : -

T100 - VHF operation between 150MHz and 180MHz

T200 - VHF operation between 200MHz and 220MHz

T400 - UHF operation between 430MHz and 470MHz

For variants outside of these frequency bands please consult the factory.

For other versions or specific requirements please contact our Sales Team
on +44 (0)118 981 1444